Page 1 of 1
T3610 HDD Fan 1
Posted: Mon Feb 26, 2024 10:27 am
by fredisherenthere
What part number fan is used in that position? I found out 2 Noctuas AF-9's won't work when fan is turned on in bios
Re: T3610 HDD Fan 1
Posted: Mon Feb 26, 2024 5:07 pm
by frankr2994
So that header was used if you bought a 2.5 drive bay kit that fit into the 5.25 bay. It would have had 1 or 2 very small fans in it.
Re: T3610 HDD Fan 1
Posted: Tue Feb 27, 2024 7:47 pm
by fredisherenthere
What am I looking for then your answer is vague
Re: T3610 HDD Fan 1
Posted: Tue Feb 27, 2024 8:42 pm
by frankr2994
fredisherenthere wrote: Tue Feb 27, 2024 7:47 pm
What am I looking for then your answer is vague
From your original post it sounds like when you connect 2 fans to that header they won't work. Will it power a single fan?
What adapter are you using to go to the motherboard header?
The only point I was trying to make with my previous statement was Dell never intended that header to run very much.
Here is the drive kit that would have been used with that.
New 3.5” HDD Hard Drive to 5.25” Cage Compatible with Dell Precision T3600 T3610 T5600 T5610 T5810 T5820 T7810 T7820 Tower 0WM1YT WM1YT
https://a.co/d/3GYMSWJ
And the 2.5 kit.
https://www.ebay.com/itm/386179746166?m ... media=COPY
Re: T3610 HDD Fan 1
Posted: Sun Mar 03, 2024 2:15 pm
by fredisherenthere
thanks that helps after further investigation it looks like that connector on the mobo does not support pwm