HP Z420 Boot Loop Problems
Posted: Thu May 23, 2024 7:22 pm
So recently i've upgrade my HP Z420 workstation to a gaming pc by switching to 750w PSU, GTX 1080ti GPU and Intel Xeon E5-2687w v2 CPU. I also reinstall a clean Win 10 22h2 instead of win 11 23h2 that i'd used before. However ever since i've done these upgrade, my z420 has a boot loop problem and everytime the system reboot i have this error message from the bios:
929-Fatal MCA error
CB0/LLC5 error detected CPU 0
Memory hierachy error
Has anyone found any solutions for this kind of bulls***? I've tried many solutions including un-plug all connect cables from PSU to mainboard, reseating, moving to different slots and cleaning RAM, reseating and cleaning CPU, re-install windows... It actually solved the problem BUT if i shutdown the PC and turn it on 3 or 4 hours later or the day after, this boot loop happen again. It's been 2 weeks since i've this problem I'm so frustrated right now...
929-Fatal MCA error
CB0/LLC5 error detected CPU 0
Memory hierachy error
Has anyone found any solutions for this kind of bulls***? I've tried many solutions including un-plug all connect cables from PSU to mainboard, reseating, moving to different slots and cleaning RAM, reseating and cleaning CPU, re-install windows... It actually solved the problem BUT if i shutdown the PC and turn it on 3 or 4 hours later or the day after, this boot loop happen again. It's been 2 weeks since i've this problem I'm so frustrated right now...