hello i need help with power board on t5810

[ChinoxL]

hello green pc ive been watching all your videos and reading your guide.
i decided after your guide to buy a 850w upgraded from my 685w psu
and i also bought a eva 1080ti 11gb upgraded from my gtx 1080 but when i powered it on
it was getting really hot over 90 degrees so i figured my 685 wasnt enough
now that i have the 850w new came in today im wondering if it still wont work because
i only have one 8pin to 8+6 pin dedicated gpu slot.. i tried the cpu2 slot and bought a 10pin to 6+2
but when i hook that specific cpu power it blinks orange and wont turn on at all .. as soon as i remove
the cpu power it turns on ... is there a power board thats made for this 850 with 2 gpu ports?
i found a guy on reddit making home made ones but its sketchy and 100 bucks plus shipping please help me i only started this build cause i watched your videos!! ty

[uco73]

As far as I know, the Dell 5810 only has 2 power supply options: 425W and 685W. I haven't heard of an 850W power supply for the 5810.

[frankr2994]

hello green pc ive been watching all your videos and reading your guide.
i decided after your guide to buy a 850w upgraded from my 685w psu
and i also bought a eva 1080ti 11gb upgraded from my gtx 1080 but when i powered it on
it was getting really hot over 90 degrees so i figured my 685 wasnt enough
now that i have the 850w new came in today im wondering if it still wont work because
i only have one 8pin to 8+6 pin dedicated gpu slot.. i tried the cpu2 slot and bought a 10pin to 6+2
but when i hook that specific cpu power it blinks orange and wont turn on at all .. as soon as i remove
the cpu power it turns on ... is there a power board thats made for this 850 with 2 gpu ports?
i found a guy on reddit making home made ones but its sketchy and 100 bucks plus shipping please help me i only started this build cause i watched your videos!! ty

Whatever 10 pin harness you bought was wrong. Don't use it again. You are shorting out your computer.

The 8 pin VGA connector on the power distribution board is good for 18 amps. The 10 pin is an eps connector. Its wired different. It contains 2 18 amp rails in it when used with the 685 or I thought it was an 825w PSU. I have both at home. I made my own 10 pin to 8 pin harness and bought an 8 pin to 8 pin for the VGA connector. I've ran a 2080ti overclocked no problem in a 5810. But you need to utilize both pdb connections and they need to be wired correctly

[AndyB]

Hi
The 825 Watt power supply has part number 0W1FJK (W1FJ), there are some on ebay at the moment.

Thanks
Andy